#1 2014-12-07 08:41:29

codeworkx
Administrator
Registered: 2014-10-05
Posts: 84

USB flash installation media

Using Linux:
Run the following command, replacing /dev/sdx with your drive, e.g. /dev/sdb. (do not append a partition number, so do not use something like /dev/sdb1):

dd bs=4M if=/path/to/bbqlinux.iso of=/dev/sdx && sync

Using Windows:
USBWriter: https://sourceforge.net/p/usbwriter/wiki/Documentation/
Win32DiskImager: https://sourceforge.net/projects/win32diskimager/

Don't forget to label the USB-Drive "BBQLINUX", otherwise BBQLinux will not boot.

For more infos see: https://wiki.archlinux.org/index.php/US … a#Using_dd

Offline

#2 2015-02-26 02:56:45

MidnightRider
Member
From: Kannapolis, NC
Registered: 2015-02-26
Posts: 3

Re: USB flash installation media

Hey, first post here, just wanted to say that i just installed bbq from usb thumb drive and i did not label it as BBQLINUX and it booted and installed just fine. not sure if something has changed since this was posted. just wanted to let you know


-Jerry

Offline

Board footer

Powered by FluxBB